Reading Charts. Lesson 8 of 12 · 14 min read
Bollinger Bands
Learn how Bollinger Bands are built, how traders read stretched prices and squeezes, and why a band touch is a clue to check rather than a signal on its own, with the original band-pattern illustrations.
Written by the StockEducation Editorial Team · Reviewed by Associate Professor Charles Lo, CPA, PhD · Updated · How we check lessons
What are Bollinger Bands?
Bollinger Bands are three lines around price: a 20 day moving average with bands 2 standard deviations above and below it. They widen when volatility rises and narrow when it falls. In a sideways range, traders watch for bounces off the lower band and rejections at the upper band; in a strong trend, price can ride one band for weeks.
Key takeaways
- Bollinger Bands are a 20 day average with bands 2 standard deviations above and below it, so they track volatility.
- In ranges, traders watch the lower band for bounces and the upper band for rejections.
- In a strong trend, price can ride one band for weeks.
- A squeeze shows quiet volatility; only the breakout close shows the direction, and that close can fail.
- Band signals lag, breakouts whipsaw, and frequent trading adds costs and taxes.

Start the lessonTake the quick checkRead the FAQSee the sources
All 7 parts of this lesson
- What are Bollinger Bands, and how are they built?
- How do traders read the lower and upper bands in a range?
- What is a squeeze, and what happens after it?
- Why can price keep touching one band without turning?
- What is a W bottom inside the bands?
- Which band setups look bullish, and which look bearish?
- What can go wrong when you trade on the bands?
Part 1 of 7 · How the bands work
What are Bollinger Bands, and how are they built?
Bollinger Bands are three lines wrapped around a price chart. The middle line is usually the 20 day simple moving average, the average closing price of the last 20 trading days.1 The upper and lower bands sit 2 standard deviations above and below it.1
Standard deviation measures how far prices have been swinging around their average. So the bands widen when price becomes more volatile and narrow when it calms down. That is the whole idea: the bands show you what normal looks like right now, and when price is stretched beyond it.
Worked example
Take a made up stock whose last 20 closes ranged from $49.00 to $51.90. Their average is $50.48, so that is the middle band. Their standard deviation is $0.73, so the upper band is $50.48 plus 2 × $0.73, or $51.95, and the lower band is $50.48 minus $1.46, or $49.02.
With the usual settings, about 95% of closes in a calm, random market would fall inside the bands, which is why a close outside them gets attention. That share is a property of the arithmetic, not a promise: in a trend, price can sit outside a band for days.

The bands are a 20 day average plus and minus 2 standard deviations, so they widen when prices swing and narrow when they calm.
Part 2 of 7 · Watch zones
How do traders read the lower and upper bands in a range?
In a sideways range, the bands help show where price is stretched relative to its recent average. A touch alone is not a reversal signal.
The lower-band bounce
Price reaches or briefly dips below the lower band, then closes back stronger. Support and stronger volume can add confirmation. Price that keeps sliding down the band is showing a different pattern.

The upper-band rejection
Price reaches the upper band, fails to hold its advance and closes lower. Resistance can strengthen that warning. In an uptrend, price can continue along the upper band instead.

The reaction after a band touch matters more than the touch alone.
Part 3 of 7 · The squeeze
What is a squeeze, and what happens after it?
A squeeze occurs when the bands contract as recent volatility falls. It tells you that the recent trading range is tight; it does not tell you which direction the next move will take.
An upside breakout
Price closes above the upper band after the squeeze. Higher volume and follow-through add context, while a quick return inside the range can signal failure.

A downside breakdown
The same compression can resolve downward. A close below the lower band with stronger selling is the opposite pattern.

Bandwidth measures the distance between the bands relative to the middle band. Use consistent settings when comparing it over time.
A squeeze shows compressed volatility, not a known breakout direction.
Part 4 of 7 · Trends versus ranges
Why can price keep touching one band without turning?
In a strong uptrend, price can keep touching the upper band while continuing higher. In a strong downtrend, it can keep touching the lower band while continuing lower. This is called band walking.

A first upper-band touch is therefore not automatically a sell warning, and a lower-band touch is not automatically a bargain. First ask whether price is trending or ranging, using its highs, lows and the slope of the middle band.
Interpret a band touch in the context of the trend or range.
Part 5 of 7 · W bottoms
What is a W bottom inside the bands?
A more advanced pattern is the double bottom inside the bands, often called a W bottom. Price makes a first low outside or near the lower band, bounces, then falls again and makes a second low.
If the second low holds inside the lower band instead of breaking outside it again, selling pressure may be weakening. The bands help here because they adjust for volatility: a second low at a similar price can sit comfortably inside a band that has since widened.
The pattern alone is not a signal. Chart readers give it more weight when price then breaks above the middle band or starts making higher lows.

In a W bottom, the second low holds inside a band that has widened since the first, which is the sign selling pressure is fading.
Part 6 of 7 · Signal summary
Which band setups look bullish, and which look bearish?
Here are the common readings in one place. Each one is a clue, and each one has a confirmation that chart readers look for before trusting it.
Bullish readings
| Setup | What to look for | Best confirmation |
|---|---|---|
| Lower band bounce | Price touches the lower band and closes back stronger. | A bounce off support or a green candle. |
| Squeeze breakout up | Tight bands, then a close above the upper band. | Higher volume and follow through. |
| Middle band bounce | Price pulls back to the 20 day average in an uptrend and bounces. | The trend stays above the middle band. |
| Double bottom inside the bands | The second low holds inside the band. | Price reclaims the middle band. |
Bearish readings
- Upper band rejection. Price touches the upper band, fails and closes lower.
- Squeeze breakdown. Tight bands, then a close below the lower band.
- Lower band walk. Price keeps riding the lower band in a downtrend.
- Middle band rejection. A bounce attempt fails at the 20 day average in a downtrend.
- Failure to reach the upper band. Rallies get weaker and stop short of the upper band.
When price keeps riding the lower band or rallies keep failing, the weakness is a warning, not a bargain.

Every band reading comes paired with a confirmation, and chart readers wait for the pair.
Part 7 of 7 · Limits
What can go wrong when you trade on the bands?
Bollinger Bands use past prices, so they cannot predict a certain turning point. A breakout can reverse, and a range can become a trend.
- Whipsaws: price can break out and then return quickly inside the bands.
- Costs and taxes: repeatedly acting on signals adds trading costs and may create tax consequences.
- Wrong context: a band touch in a strong trend means something different from a rejection in a sideways range.
Use bands as one source of context alongside price, volume, trend and a risk plan. The original illustrations explain patterns, not a promised success rate.
Band signals can fail; no band pattern is a complete trading system.
Quick check
Quick quiz: test what you just read
Pick an answer to see why it is right. 5 questions, no account needed.
1. With standard settings, where do the upper and lower Bollinger Bands sit?
2. What adds information to a touch of the lower band in a sideways range?
3. What can repeated lower-band touches mean during a strong downtrend?
4. What does a Bollinger squeeze tell you?
5. What should you allow for after a squeeze breakout?
Questions people ask
Bollinger Bands FAQ
What settings do Bollinger Bands use?
The standard setup uses a 20 day simple moving average as the middle line, with the upper and lower bands set 2 standard deviations above and below it.1 Most charting platforms let you change both settings, but the defaults are the usual starting point.
What is a Bollinger Band squeeze?
A squeeze happens when the bands contract tightly because volatility has gone quiet. Quiet periods often lead to larger moves, but the squeeze itself does not tell you which way price will go. Many traders wait for a close above or below the bands, though such breakouts can fail and reverse.
Does touching the lower band mean a stock will bounce?
No. A touch only shows that price is stretched to the downside, and in a strong downtrend price can keep walking down the lower band. The better clue is a touch followed by a rejection of the low and a stronger close, ideally in a sideways range with support or volume confirming.
What is band walking?
Band walking is when price keeps touching or riding one band during a strong trend. In an uptrend it can hug the upper band while climbing; in a downtrend it can ride the lower band while falling. In a trend, a band touch can be a sign of strength rather than exhaustion.
Should I use Bollinger Bands on their own?
No. Every band signal still needs confirmation.1 Look for a bounce or rejection candle, nearby support or resistance, volume, or a break of the middle band, and decide first whether the market is trending or ranging.
You finished this lesson.
You now have the main ideas from this lesson. Next, practice where mistakes cost nothing: a free account saves your progress and unlocks the practice simulator with virtual money.
Free, no card. Lessons stay free to read without an account.
Your notes on one card, and what comes next
- Step 1 · DoneBollinger Bands
See your notes on one card
- Bollinger Bands are a 20 day average with bands 2 standard deviations above and below it, so they track volatility.
- In ranges, traders watch the lower band for bounces and the upper band for rejections.
- In a strong trend, price can ride one band for weeks.
- A squeeze shows quiet volatility; only the breakout close shows the direction, and that close can fail.
- Band signals lag, breakouts whipsaw, and frequent trading adds costs and taxes.
- 2Step 2 · NowSave your progress with a free account
Keep your course progress and practice on real U.S. stocks with virtual cash.
Create your free account No card needed. Lessons stay free to read. - 3Step 3Follow the learning pathThe learning pathFree
Learn the rest in the right order
Ten modules of lessons, videos, tools and quizzes, ordered so each step builds on the last, from market basics to company analysis and risk.
Start the learning path
Want the full sequence? See the course outline →
Sources and assumptions
- Fidelity: Bollinger Bands
- S&P 500 daily prices, Yahoo Finance
- FINRA: market timing and buy and hold strategies
- FINRA: Stocks
- SEC Investor.gov: Introduction to Investing
Use these references to check the definitions, methods and risks discussed in this guide. Examples are for learning and do not predict investment results.
StockEducation provides general education, not personal financial, tax or legal advice. Companies and funds named here are teaching examples only. Nothing here recommends buying or selling any security. Investing involves risk, including the loss of money you invest.
